Paint Testing Instruments

Input supply Operated by built-in single 6 V, 4AH battery Output Voltage 8 KV to 30 KV pulse type Size (W) 7" (L) 8.5" (H) 2.5" Weight 2.00 Kgs. with battery, approximately

Model GLOSS-333 Measure Angle 20/60/85 Comply with standard ISO 2813, GB/T 9754, ASTM D 523, ASTM D 2457 MeasuringArea(mm) 20:10x10 60:9x15 85:5x36 Measurement Range 20:01000GU 60:01000GU 85¼š0160GU Division Value 0.1GU Measurement Range Repeatability Reproducibility 0-10GU 10-100GU 100-1000GU ± 0.1GU ± 0.2GU ± 0.2%GU ± 0.2GU ± 0.5GU ± 0.5%GU Measurement Standard Conform with JJG696 first class glossmeter working requirement Chromaticity Corresponding Corresponding with CIE 1931(2) under CIE C light source Errors ±1.5 , ±1.5% Measuring Time 0.1s Dimension L*W*H : 160mm*75mm*90mm Weight 350g Language Chinese/English Battery 3200mAh Li-ion Battery, >10000 times(within 8 hours) Display TFT 3.5 inch Interface USB/RS-232 Storage Basic mode:1000 Software GQC6 Quality Control Software with QC report printing functions and more extended functions. Operation Temperature 040„¼ˆ32104F¼‰ Storage Temperature -2050„¼ˆ-4122F¼‰ Humidity <85% relative humidity, no condensation Standard Accessories Power Adapter, USB cable, User Manual, GQC6 software CD (except HG60S), Calibration Plate Optional Accessories Miniature Printer Note The specifications are subject to change without notice.

BGD 500 Digital Pull-off Adhesion Tester is a portable, hand-operated instrument which is used to measure the force required to pull a specified test diameter of coating away from its substrate using hydraulic pressure. The pressure is displayed on a digital LCD and represents the coating™s strength of adhesion to the substrate. It evaluates the adhesion (pull-off strength) of a coating by determining the greatest tensile pull-off force that it can bear before detaching. Breaking points, demonstrated by fractured surfaces, occur along the weakest plane within the system consisting of dolly, adhesive, coating layers and substrate. BGD 500 Digital Pull-off adhesion Tester conforms to ASTM D 4541, ASTM D 7234, EN 13144, ISO 4624, ISO 16276 etc.

The Pencil hardness Tester is the most common but also the most inconsistent technique to measure the hardness of a coating. The test conduct scratch hardness tests to determine the resistance of coating material in order to prevent the scratches on the surface. The pencil that damage the surface are tekan as the final measurement of scratch hardness. We will also supply all range of pencil for hardness Test Like : 6B, 5B, 3B, 2B, B, Hb, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H, F.

60 angle for semi-gloss Measuring mode: basic measurement, statistical measurement, continuous measurement, QC measurement (only for GQC6 software) Continuous mode to check uniformity over large areas Connect to PC, more extend functions Input gloss value manually Beauty appearance, good man-machine communication interface Powerful functions to meet many different requirements Large storage to save over 1000 data built-in lithium ion rechargeable battery